AirPods Double Tap Not Working: 6 Ways to Fix It

If you are having issues with your AirPods double tap not working, this article was specially written for you. Many other users have complained about this same issue, making it compulsory to write about this topic.

In this article, we will help you understand some of the reasons why your AirPods double tap might not be working and also provide you with solutions to overcome this problem.

Why are my AirPods touch controls not working?

There are various factors behind this problem, and some of the most common ones include:

• The double-tap feature is disabled – This is the most common reason why your AirPods double-tap is not working. If this feature is off, your AirPods touch sensor will not work.
• The sensor area is dusty – You could face this problem because your AirPods sensor is covered with dust. This can dull the sensitivity of your sensors, causing this problem.
• Your device is outdated – If the device you are using is outdated, you will always face this error.
• Problem with the AirPod – If there is any hardware issue with the AirPods, the double-tap feature will not work.

Now that we know some of the most common causes of the Airpods double tap not working, let us look at some ways to troubleshoot this problem.

How do I fix my AirPods double tap if it is not working?

Try out these quick fixes before heading to our more comprehensive solutions.

• Ensure that the sensor area is clean – The build-up of dust on the AirPod’s sensor could be the reason why you are having this problem. Ensure that the sensors are dust free.
• Check if there is a problem with the AirPod hardware – Check to know if there is any physical or hardware damage to the AirPod. You can try connecting to a different device and see if it works well.
• Ensure that you are double tapping on the right location – Make sure that you are tapping at the right location (which is usually between the microphone and slit speaker – the tiny dot on the side). Tapping on the wrong location could be the cause of this problem.

If you have tried the steps above without success, go ahead with the solutions below.

1. Enable the double-tap feature for your Airpod

1. Connect your AirPod to your device, navigate to the Bluetooth settings, and select your AirPod device name.
   
2. Secondly, after connecting to your device, click on the info icon.
   
3. In the info menu, you will see the DOUBLE-TAP AIRPOD option.
   
4. The image above shows that the AirPods double-tap settings are activated for Siri.
5. You can also modify the options by clicking on either the Left or Right option, a list of options will be displayed, choose anyone except Off.
   
6. Lastly, check to see if your AirPods double tap is now working.

2. Disable auto-detection

1. Connect your AirPod to your device, navigate to the Bluetooth settings, and select your AirPod device name.
   
2. After connecting to your device, click on the info icon.
   
3. Look for Automatic Ear Detection and click the toggle to disable it.
   
4. Finally, after doing this, test your AirPods and see if the problem has been fixed.

3. Reset and repair your AirPods

1. Click the info icon to enter your AirPods connectivity settings, go down, and click the Forget This Device option.
   
2. Next, put both pods inside the charging case, leaving the lid open then hold the button at the back of the case until the white light blinks.
3. Keep the flip open and reconnect to your device, the AirPod will appear under the OTHER DEVICES option, click on it to reconnect.
4. This step should fix the AirPods double tap not working problem.

4. Update your AirPods Firmware

1. Ensure that your AirPod is connected to your device.
2. Secondly, go to settings and choose General.
   
3. Next, select About.
   
4. Now, look for the AirPods and click on it.
5. If any Firmware is available, click on it. The Firmware is already updated in this example.
   
6. Lastly, after updating your Firmware, check to see if the AirPods double tap works.

5. Reset network settings

1. Go to settings and choose General.
   
2. In the General settings, pick Transfer or Reset iPhone.
   
3. Click the Reset button.
   
4. Next, choose Reset Network Settings.
   
5. Enter your Passcode in the authentication prompt.
   
6. This reset could take a while, so patiently wait till it is complete.
7. Finally, after the reset is complete, connect your AirPods and see if the double-tap feature is working.

6. Contact Support

If this problem persists after trying all the steps listed in this article, then it is time to contact Apple support. They can provide you with solutions tailored to your individual need.

To contact support, go to the official support page, scroll to the bottom of the page, and click Get Support. Follow every other on-screen instruction in order to reach the support team and fix your problem.

In conclusion, following the steps listed in this article will help you overcome the AirPods double tap not working problem and help you get back to enjoying your device.

Keep in mind that the steps listed in this article have not been arranged in any particular order, so ensure to try as many solutions as possible till you find one that works best for you.